Mold Release Spray

Aerol Heavy Duty Silicone Free Spray

Silicone Free Sprays for Mold Release Application:

Afra® Heavy Duty Silicone Free Spray is a pressurized solution of proprietary ingredients and solvents. On spraying, the propellant and solvent evaporate, leaving behind a thin film of active ingredients. These films of actives act as release agents in the Injection molding operations of plastics and also as an anti-spatter agent in welding operations. These grades have been specifically designed for applications where the presence of films of silicone fluids is undesirable.

Unique Silicone Free preparations designed for mold release of molded articles that are required to be painted, printed, electroplated, metalized or glued. The actives transferred to the molded article is compatible with most paints, inks and coating materials and does not hamper the adhesion of the paint ink or coating materials tothe substrate. There is no need to degrease the molded article prior any post molding operation. These mold release sprays are compatible with ABS, Nylon, Polypropylene, PPO, Polystyrene, Polycarbonate, ABS, Acetyl, Polyester, Polysulfone, Polyethylene and several Rubbers & Metals.

Key Features: 

•    Free from chlorinated solvents, Class I & Class II Ozone Depleting substances.

•    Special propellant gas with optimized propane-butane ratio and free from un-saturates.

•    Unique combination of ingredients and valve design enables a fine mist spray for optimized application on molds.

•    Wide choice of dry, semi-dry and oily actives deposition on  mold.

•    Most Grades are Non-toxic and generally odorless. Suitable for incidental food contact.

•    Use of plastic safe solvent enhances compatibility with most plastic substrates.

 


Additional Information:
  • Minimum Order Quantity: 1 Unit

Aerol Silicone Spray

 

Afra® heavy duty silicone sprays are:

· The largest selling mould release and lubricant spray in India.

· Free from CFCs and based on Eco friendly Hydrocarbon Aerosol Propellant.

· Manufactured as per ASTM D 3091-72R03 norms

· Comply with RoHS and other international norms

· Manufactured with food grade ingredients. Suitable for incidental food contact

Grade

Features

Net contents

888

Plastic safe solvent based, moderate oiliness. Economy grade

250g

8080

Plastic safe solvent based, Dry type (low transfer) Premium quality

300g

8081

Plastic safe solvent based, Wet type/ moderate oiliness, Improved release cycles

300g

8082

Plastic safe solvent based, Wet type/ high oiliness, Improved release cycles

300g

8083

Low Solvent content, Dry type/ Ultra Low Transfer enables painting/ printing without degreasing molded article.

250g

8085

Solvent & odor free, high oiliness for superior lubricity and mold release

300g

8088

Chlorinated Solvent based Silicone, Wet type, Improved release cycles.

400g

7703

Low solvent content, Dry type/Ultra low transfer/ special silicone enables painting/ printing without degreasing molded article.

300g

8801

Complex Siloxane for release of PU molded articles

300g

1275

Solvent based Silicone, High temperature resistant up to 300°C

275g

1277

Solvent free Silicone, High temperature resistant up to 300°C

275g

Afra Heavy Duty Silicone Spray

Afra® Heavy Duty Silicone Spray for Mold Release are Silicone based aerosol preparations and are available as several grades specifically for Injection Molding and Thermoplastic Industry.

 

They are designed to improve release efficiency in many processes including compression, transfer, vacuum forming, pour casting, die casting and extrusion molding.

 
These mold release sprays are compatible with ABS, Nylon, Polypropylene, PPO, Polystyrene, Polycarbonate, ABS, Acetyl, Polyester, Poly sulfone, Polyethylene and several Rubbers, Waxes, Resins  & Metals.

APPLICATIONS:

·         Outstanding properties enable the use of Silicone Sprays as a Mould Release Agent in the injection molding of Plastics and Rubber. They provide defect free and faithful reproductions from complicated moulds.

 

·         As a release agent in metallurgical molding/casting, candle manufacturing and resin casting, it facilitates molding and casting operations.

 

·         As a Non-Stick agent on cutting blades of paper, plastic, adhesive tapes etc., gluing equipment in printing presses (press room and bindery) & plastic heat sealing equipment, it prevents the build-up of glue and facilitates easy cleaning.

 

·         As a nontoxic, non-staining, non-carbonizing, high and low temperature resistant lubricant for delicate mechanisms and components where friction takes place between non-metal and non-metal surface, non-metal to metal surface or metal to metal surface such as curtain runners, blinds, sliding doors & windows, tread mill belts, zippers of luggage, diving suits and tents, printer head guides, sewing needles-thread-work tables in high speed garment and leather production, it provides clean, non-staining lubrication.

 

·         In automobiles these grades may be used to maintain locks, hinges, telescopic antenna, seat rails, seat belt recoilers, wiper blades, battery terminals etc. They are also used to lubricate conveyors in food and pharmaceutical industries due to their non-toxicity.

 

·         As a moisture / rust resistant protective coating on chrome plated automobile parts, delicate instruments, components & electrical assemblies and switch gear, it keeps moisture out.

 

  • As a polishing and finishing agent for plastic, rubber, polished/ painted wooden and steel surfaces such as auto tyres, rubber trims, dashboards, bumpers, TV & audio cabinets, plastic, wooden and steel furniture etc., it provides gloss, shine and protection.

Additional Information:
  • Minimum Order Quantity: 1 Unit
Looking for Mold Release Spray ?
© Aerol Formulations Private Limited
 
Desktop Site Back to top